This is the current status of the PC housed at MBO running services for the AllSky Camera. It is synchronised every 5 minutes. If the timestamp is more than 5 minutes out then the power has probably gone out!
============================================================================================
Tue 5 Jul 09:50:01 AEST 2022
============================================================================================
09:50:01 up 4 days, 14:41, 1 user, load average: 0.30, 0.29, 0.28
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
pi tty1 - Thu19 4days 0.14s 0.09s -bash
============================================================================================
============================================================================================
Current disk space
Filesystem Size Used Avail Use% Mounted on
/dev/root 59G 36G 21G 64% /
============================================================================================
All Sky Camera status
* allsky.service - All Sky Camera
Loaded: loaded (/etc/systemd/system/allsky.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2022-06-30 19:02:42 AEST; 4 days ago
Main PID: 618 (allsky.sh)
Tasks: 11 (limit: 4915)
CGroup: /system.slice/allsky.service
|- 618 /bin/bash /home/pi/allsky/allsky.sh
|- 686 ./capture -angle -6 -autoexposure 0 -autogain 1 -bin 1 -brightness 50 -coolerEnabled 0 -darkframe 0 -daytimeDelay 30000 -delay 6000 -exposure 30000 -filename image.jpg -flip 0 -fontcolor 96 250 255 -fontline 1 -fontname 0 -fontsize 0.7 -fonttype 0 -gain 50 -gamma 50 -height 0 -latitude 37.9725S -longitude 145.4955E -maxexposure 45000 -maxgain 250 -outlinefont 0 -quality 95 -showDetails 1 -smallfontcolor 0 0 255 -targetTemp 0 -text MBO_Inc. -textx 15 -texty 30 -time 1 -type 1 -usb 40 -wbb 90 -wbr 53 -width 0 -daytime 1
============================================================================================
All Sky Camera Service Active?
active
============================================================================================
All Sky Camera Service Reboot Enabled?
enabled
============================================================================================
Failed Services
UNIT LOAD ACTIVE SUB DESCRIPTION
* lightdm.service loaded failed failed Light Display Manager
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.